Langsung ke alat

Process diagram: Brick manufacturing

Pilih fitur utama process diagram ini untuk overview-mu, tulis laporanmu dengan timer 20 menit, lalu bandingkan dengan contoh jawaban band 8.

WRITING TASK 1

You should spend about 20 minutes on this task.

The diagram below shows how bricks are made in a factory.

Summarise the information by selecting and reporting the main features, and make comparisons where relevant.

Write at least 150 words.

Brick manufacturing
  1. 1Digging clayClay is extracted from a quarry
  2. 2CrushingLarge lumps are broken up
  3. 3MixingClay is mixed with water and sand
  4. 4ShapingThe mixture is pressed into moulds
  5. 5DryingBricks are dried in warm air for two days
  6. 6FiringThey are baked in a kiln at 1,000°C
  7. 7CoolingBricks cool slowly to avoid cracking
  8. 8DeliveryBricks are stacked and taken to building sites

Soal latihan ini ditulis oleh GoPrep dengan gaya ujian. Ini bukan soal resmi IELTS.

Apa yang perlu ada di overview

Overview menyebut tren atau perbedaan utama dalam satu atau dua kalimat, tanpa angka. Inilah fitur yang diangkat oleh jawaban yang kuat:

  1. 1Overall, brick manufacture is a linear process with eight stages, starting with digging clay and ending with delivery to building sites.
  2. 2The clay is dug, crushed and mixed with water and sand, then pressed into moulds.
  3. 3The shaped bricks are dried for two days, fired in a kiln at 1,000°C, cooled slowly and delivered.

Tulis dengan batas waktu

Gunakan beberapa menit pertama untuk membuat rencana, lalu mulai menulis.

20:00

0 kata dari minimal 150

Jawabanmu hanya ada di halaman ini. Salin sebelum kamu meninggalkannya.

Contoh jawaban band 8

Tulis jawabanmu sendiri dulu, lalu bandingkan: bagaimana contoh ini menjawab soal yang persis sama, apa fungsi setiap paragraf, dan frasa mana yang bisa kamu pakai.

Tampilkan contoh jawaban (172 kata)

The diagram shows how bricks are made in a factory, in a process that consists of eight stages.

Overall, the process is linear. Clay is dug up, shaped into bricks and hardened by drying and firing, and the finished bricks are then delivered to building sites. The first three stages prepare the clay, the next four shape and harden the bricks, and the final stage delivers them.

First, clay is extracted from a quarry. Large lumps are then broken up by crushing, and the clay is mixed with water and sand. Next, the mixture is pressed into moulds so that it is shaped into bricks.

In the middle of the process, the bricks are dried in warm air for two days. They are then baked in a kiln at 1,000°C, so the bricks are strengthened gradually.

In the final two stages, the bricks are cooled slowly so that cracking is avoided. Slow cooling is therefore an important final step. Finally, they are stacked and taken to building sites, which completes the process.

Kosakata berguna

FrasaArti
claya soft earth used for making bricks
be pressed into mouldsbe shaped in forms
dry in warm airremove moisture
be fired in a kilnbe baked in an oven
crackbreak with thin lines
building sitesplaces where construction happens

Sedang bersiap untuk IELTS?

Semua alat gratis

Generator topik Speaking

Jawab pertanyaan acak Part 1, 2, dan 3 dengan timer ujian.

Kalkulator band score IELTS

Rata-rata band dari empat skill, dibulatkan dengan cara IELTS membulatkannya.

Konverter skor IELTS

Bandingkan band IELTS dengan skor TOEFL, Duolingo, dan PTE serta level CEFR.

Syarat IELTS universitas

Cari skor IELTS yang diminta universitas, lengkap dengan sumbernya.